Respiratory

Gas, Vapour and Particulate Filter 6099 protects against organic vapours (boiling point above 65°C, inorganic vapours, acid gases, ammonia and its derivatives, mercury, formaldehyde up to 10ppm and particulates. Suitable for use with 3M™ Reusable Full Face Respirators featuring the Bayonet filter connection system: 3M™ Reusable Full Face Mask 7097S, 3M™ Reusable Full Face Masks 6000 Series

3M™ P3 R Particulate Filters 5935 protect against airborne particles including fine dust and water/oil-based mists. Suitable for use with all 3M half and full face masks when combined a 3M™ Retainer 501 and either a 3M™ Gas and Vapour Filter 6000 Series or a 3M™ Filter Platform 603.

For use with 3M™ Versaflo™ Powered Air Respirator TR-300+. 3M™ High Efficiency P3 Particulate filter can be changed quickly and easily by hand.

The 3M™ Versaflo™ Pre Filter TR-3600 for use with the 3M™ Versaflo™ Powered Air Respirator TR-300. A Pre Filter can extend the life of the Powered Air Respirator by capturing large particles that would otherwise clog the filter.

3M™ A2 Gas and Vapour Filters 6055 protect against organic vapours with boiling points above 65°C. Suitable for use with all 3M half and full face masks.

With the new patent pending Force 8™ PressToCheck™ filters you can instantly check that you have the correct face seal every time.

Replacement Filteres for Force 8 & 10. Cost effective filters for protection against particulates with low profile angle for minimum visual impairment. Cartridges have an integral maintenance free disposable inhalation valve. Easy to attach to the respirator with a secure fit when applied.

Fits for Force 8 & Force 10 Mask. The Force8™ PressToCheck™ filters you can instantly check that you have the correct seal every time. These are PressToCheck™ ABEK1P3 multi-gas, vapour and dust replacement filter pair. FIT IT! Don the Mask - Put the straps and harness over your head and pull the straps to a suitably tight and comfortable fit. PRESS IT! PressToCheck™ - Press the front and backs of both filter covers together to stop air from entering through the filters. CHECK IT! Inhale - No air should come through the mask. Adjust the mask and repeat until it doesn't. Release when seal is made.

Compatible with BLS 4000 half masks

Protects against Gas, Vapour & Dust. Suitable for Series 7000 and 9000 Masks.

With the new patent pending Force8™ PressToCheck™ filters you can instantly check that you have the correct seal every time.

Part of the 2000 Series of filters, these 3M 2135 P3 R particulate filters are for use with a wide range of 3M full-face and half-face masks. They offer respiratory protection against fine dusts, and oil- and water-based mists, and they’re easy to click into place thanks to the bayonet connection.

3M™ ABEK1 Gas and Vapour Filters 6059 protect against organic vapours with boiling points above 65°C, inorganic and acid gases and ammonia. Suitable for use with all 3M half and full face masks.

Replacement Batteries for your 3M™ Adflo™ powered respirators and Speedglas™ Welding lens.

CleanSpace WORK particulate filters TM3 P3 are suitable for protection against airborne particulates (dust, mists, fumes) with a particulate filtration efficiency > 99.97%. CleanSpace WORK filters are compatible with the CleanSpace WORK power unit (CS3001WORK).

The CleanSpace Protective Cover and Pre-Filter is suitable for protection against airborne particulates (dust, mists and fumes). The Protective Cover and Pre-Filter is designed to remove course particles and enhance the life of the Particulate P3 Filter (PAF-0035). The Protective Cover and Pre-Filter should be changed after each use.