Products tagged with 'hillbrush'

254mm, Polypropylene block, filled stiff Polyester. The D4 was one of the first all plastic hygiene hand scrubs made by Hillbrush some 45 years ago. It has been one of our most popular products ever since. This rugged brush is designed to work and to last. The angled material at the sides and front will allow cleaning in hard-to-reach corners, while the gripped handle is comfortable to use even in gloved hands.

280mm deck scrub, Polypropylene block, filled very stiff Polyester, for spot work in smaller areas. As part of our Premier Range, these brooms are good, durable and effective but have thinner backs and are lighter than other equivalent products in the general Hygiene Range. They are ideal for moderate use in industrial settings or restaurants and supermarkets where well made, easily cleaned, color coded cleaning equipment is required, but are not likely to receive heavy industrial use. Recommended handle, ALH5. See also or B759 and B770 for heavier industrial weight scrubs.

254mm, Polypropylene block, filled stiff Polyester. The D4 was one of the first all plastic hygiene hand scrubs made by Hillbrush some 45 years ago. It has been one of their most popular products ever since. This rugged brush is designed to work and to last. The angled material at the sides and front will allow cleaning in hard-to-reach corners, while the gripped handle is comfortable to use even in gloved hands. There is a resin set version, D4RES, and a softer version D5.

254mm, Polypropylene block, filled stiff Polyester. The D4 was one of the first all plastic hygiene hand scrubs made by Hillbrush some 45 years ago. It has been one of our most popular products ever since. This rugged brush is designed to work and to last. The angled material at the sides and front will allow cleaning in hard-to-reach corners, while the gripped handle is comfortable to use even in gloved hands.

322mm hand brush, Polypropylene block, filled soft Polyester. Light and agile, this counter brush has a cranked handle which is comfortable to hold, keeps the users hands away from the work surface and allows easy control. Other versions are available, B866RES is resin set, B867 is stiff, B869 is medium, B868RES is very soft. See also B1851 for a larger, heavier version, and DP3 and DP13 for accompanying dust pans.

Wire brush, 279mm Polypropylene handle filled with stainless steel wire, very abrasive.

270mm Premier Range Dish wash brush with scraper.

Grade A quality wooden handle. This 23.5mmø x 1200mm handle is best for brooms up to 12" wide.

610mm soft platform broom, wood back, filled with a synthetic alternative to Coco made using recycled plastic. This well made, well filled broom, with longer than average trim length, and is typically used in dry, dusty conditions on concrete in garages, warehouses and yards, often in the construction industry. Recommended handle, A54/2TAP.

110L bin and lid, made with shatter resistant Polypropylene. The bin has hand grips, and the lid may be locked down. It measures 650mm high, with the lid 500mmø.

270mm Premier Range Dish wash brush with scraper.

High Low brush, 260mm Polypropylene block, filled medium Polyester. The angled brush is particularly useful for for cleaning under low tables and tiled walls. Recommended handles, ALH7, ALH27, ALH8.

High Low brush, 260mm Polypropylene block, filled medium Polyester. The angled brush is particularly useful for for cleaning under low tables and tiled walls. Recommended handles, ALH7, ALH27, ALH8.

305mm scrub, Polypropylene block, filled very stiff Polyester. The material in the B770 is 0.60mm diameter and 41mm out.. The B770 is perfect for spot-type cleaning on slightly less even surfaces, and for smaller areas where soiling is likely to be harder to remove.

11 litre / 2½ gallon bucket, high impact Polypropylene, approximately 300mm ø x 300mm tall, with a sturdy contoured handle and internal litre and gallon measurements. The plastics and dyes used are EU and FDA approved for food contact, and have passed food related migration tests. The bucket is base banded for durability and stability, and has a splash free lip and convenient base hold for easy pouring. The bucket may be stored up upside down using our HH2 wall hanger. The bucket has hinges to fit the optional lid MBK15/LID. For an Anti-Microbial version, see AMMBK15, and a metal detectable & X-ray visible version, MBK15MDX.

225mm detail brush, Polypropylene block, filled stiff Polyester. Cranked and gripped handle. Great for scrubbing stubborn residues in small areas. The block is chisel-edged at the tip.

180mm niche brush, Polypropylene block, filled stainless steel wire. This tooth brush sized brush is good for detailed work, tough burnt on deposits and cleaning machinery parts. This brush has a small chisel-edged tip. Rust proof.