Products tagged with 'filters'

Part of the 2000 Series of filters, these 3M 2135 P3 R particulate filters are for use with a wide range of 3M full-face and half-face masks. They offer respiratory protection against fine dusts, and oil- and water-based mists, and they’re easy to click into place thanks to the bayonet connection.

3M™ P3 R Particulate Filters 5935 protect against airborne particles including fine dust and water/oil-based mists. Suitable for use with all 3M half and full face masks when combined a 3M™ Retainer 501 and either a 3M™ Gas and Vapour Filter 6000 Series or a 3M™ Filter Platform 603.

3M™ P3 R Particulate Filters 2138 protect against fine dusts and oil/water based mists. In addition, the filters offer relief from nuisance level organic vapours and acid gases. Suitable for use with all 3M half and full face masks.

For use with 3M™ Versaflo™ Powered Air Respirator TR-300+. 3M™ High Efficiency P3 Particulate filter can be changed quickly and easily by hand.

The 3M™ Versaflo™ Pre Filter TR-3600 for use with the 3M™ Versaflo™ Powered Air Respirator TR-300. A Pre Filter can extend the life of the Powered Air Respirator by capturing large particles that would otherwise clog the filter.

3M™ A2 Gas and Vapour Filters 6055 protect against organic vapours with boiling points above 65°C. Suitable for use with all 3M half and full face masks.

3M™ ABEK1 Gas and Vapour Filters 6059 protect against organic vapours with boiling points above 65°C, inorganic and acid gases and ammonia. Suitable for use with all 3M half and full face masks.

Compatible with BLS 4000 half masks

3M™ A1 Gas and Vapour Filters 6051 protect against organic vapours with boiling points above 65°C. Suitable for use with all 3M half and full face masks.

Gas, Vapour and Particulate Filter 6099 protects against organic vapours (boiling point above 65°C, inorganic vapours, acid gases, ammonia and its derivatives, mercury, formaldehyde up to 10ppm and particulates. Suitable for use with 3M™ Reusable Full Face Respirators featuring the Bayonet filter connection system: 3M™ Reusable Full Face Mask 7097S, 3M™ Reusable Full Face Masks 6000 Series

3M™ ABEK1 Gas and Vapour Filters 6059 protect against organic vapours with boiling points above 65°C, inorganic and acid gases and ammonia. Suitable for use with all 3M half and full face masks.

Moldex ABEK1 filters protect against organic, inorganic, acid and ammonia gases and vapours.

Provide protection against dust, mist and fumes and nuisance organic vapours with 3M™ Versaflo™ Particulate & Nuisance Organic Vapour Filter, TR-3802E. Our filter is designed to be used with 3M™ Versaflo™ Powered Air Turbo TR-300+ and is CE approved.

Protect against a range of gases and vapours.

Get effective respiratory protection against a range of hazards with 3M™ Versaflo™ ABE2K1HgP Filter, TR-6580E. Designed to be used with 3M™ Versaflo™ Powered Air Turbo TR-600 and TR-800 Series, our filter protects against organic gases and vapours with boiling points > 65°C, inorganic and acid gases and ammonia. It also protects against mercury vapour and particulates. It’s quick and simple to install directly onto the turbo unit and can be protected from physical damage using the filter cover TR-6500FC.

Protects the user from harmful gasses, vapours and dust particles. Easily attached to respirator, very little maintenance required. JSP BME330-000-000 Filter conforms to EN14387 and EN143 Safety Standards.

3M™ Particulate Filters provide protection against a wide range of dusts, mist and other particles. 3M particulate filters offer low breathing resistance and good balance with a slim, swept back profile, designed to optimise your field of vision when wearing the respirator.

3M Adflo Particle Filter, 837012, is designed to replace worn or damaged particle filters in 3M Adflo Powered Air Respirator. There are two in each pack.