3M

3M™ Particulate Filters 6000 Series connect to any half or full-face 3M™ Reusable Masks with a bayonet-style connection. The particulate filters have more surface area than many standard filters and offer lightweight and well-balanced breathing protection for hazardous environments.

3M™ P3 R Particulate Filters 2138 protect against fine dusts and oil/water based mists. In addition, the filters offer relief from nuisance level organic vapours and acid gases. Suitable for use with all 3M half and full face masks.

3M™ Disposable Respirator 8333 has been designed with comfort in mind, the super soft cushioned lining provides instant yet lasting comfort. Protects against dusts and water and oil based mists found in a wide variety of industrial applications and other work situations requiring FFP3 protection.

The 3M™ Reusable Half Face Mask 6000 Series are economical, low-maintenance and lightweight. The flexible 3M™ Bayonet Connection System allows for connection to a wide range of 3M particulate and/or gas and vapour filters.

The 3M™ Reusable Half Face Mask 6000 Series are economical, low-maintenance and lightweight. The flexible 3M™ Bayonet Connection System allows for connection to a wide range of 3M particulate and/or gas and vapour filters.

The 3M™ Versaflo™ Breathing Tube BT-30 features a self-adjusting length for improved fit and reduces risk of catching or snagging. A breathing tube connecting the air source with the headtop is required to ensure that clean air reaches the headtop reliably and with unrestricted airflow. The breathing tubes offered are compatible with all 3M™ Versaflo™ Headtops and Air Delivery Units.

For use with 3M™ Versaflo™ Powered Air Respirator TR-300+. 3M™ High Efficiency P3 Particulate filter can be changed quickly and easily by hand.

Protect your 3M™ Versaflo™ M-Series Headtop visor from scratches or overspray from paints and chemicals with 3M™ Versaflo™ Peel-Off Visor Cover M-928. Our transparent visor cover is self-adhesive and can be applied and peeled off easily. You can apply up to five covers at one time, one on top of the other.

The 3M™ Versaflo™ Pre Filter TR-3600 for use with the 3M™ Versaflo™ Powered Air Respirator TR-300. A Pre Filter can extend the life of the Powered Air Respirator by capturing large particles that would otherwise clog the filter.

Part of the 2000 Series of filters, these 3M 2135 P3 R particulate filters are for use with a wide range of 3M full-face and half-face masks. They offer respiratory protection against fine dusts, and oil- and water-based mists, and they’re easy to click into place thanks to the bayonet connection.

3M™ 1100 earplugs are made from soft hypoallergenic PU foam material to provide maximum comfort and low pressure inside the ear. The tapered design fits most ear canals and is making the plugs easier to use. Its smooth, dirt resistant surface provides better hygiene, durability and comfort.

The 3M™ Protective Coverall 4515 is an economic solution to protect from hazardous dusts. Certified to PPE Directive Category III, Type 5/6 protection for both hazardous dusts and limited liquid splashes.

3M™ First Base™ 3 Bump Cap Classic in red provides head protection to EN812:A1, with a baseball cap design and standard peak length (70 mm). It’s made with lightweight micro-fibre fabric and has side-mesh ventilation. This is combined with a flexible, ergonomic ABS shell.

The 3M™ Versaflo(TM) S-Series High Durability Hood S-333G with integrated head suspension is cut to the same design as the S-133, but manufactured using a more durable, soft, quiet, low-linting fabric. It offers high levels of comfort including a ready to use integrated suspension.

The 3M™ Reusable Half Face Mask 6000 Series are economical, low-maintenance and lightweight. The flexible 3M™ Bayonet Connection System allows for connection to a wide range of 3M particulate and/or gas and vapour filters.

3M™ First Base™ + Bump Caps are designed to provide limited head protection from bumps and minor lacerations to the head from stationary objects. They offer industrial bump protection to EN812 with their patented flexible shell design manufactured from durable ABS plastic. Protect yourself from light contact, minor lacerations and minor abrasions against stationary objects to the head with 3M™ First Base™ + Bump Caps. These bump caps feature a flexible, low profile design made from ABS plastic and breathable woven fabric and foam with airflow channels for ventilation. They have an adjustable elastic strap for a personal fit, an absorbent terry towelling sweatband and optional customisation areas where a brand name or logo can be added. 3M™ First Base™ + Bump Caps provides industrial bump protection to EN812.