3M

3M™ Reusable Respirator Cleaning Wipes are foil-wrapped wipes for cleaning mask face seals. Our wipes can be used with all 3M half and full-face masks. Clean and freshen the face seal on your reusable mask, without damaging it, using 3M™ Reusable Respirator Cleaning Wipes. Our wipes are individually foil wrapped, can be used with all 3M half and full-face masks, and increase the effective service life of your equipment.

3M™ Speedglas™ Air Duct Breathing Tube (short)

The 3M™ E-A-Rsoft™ Yellow Neons™ Earplugs are designed for insertion into the ear canal to help reduce exposure to harmful levels of noise. These products are available in a corded and uncorded version. These earplugs may be used in high noise environments and provide effective protection across all test frequencies. The uncorded version is also available in the 3M™ E-A-R™ One-Touch™ Pro Earplug Dispenser format

For use with 3M™ Versaflo™ Powered Air Respirator TR-300+. 3M™ High Efficiency P3 Particulate filter can be changed quickly and easily by hand.

Replacement Batteries for your 3M™ Adflo™ powered respirators and Speedglas™ Welding lens.

To ensure effective protection, replace pitted, scratched or otherwise worn or damaged visors and plates.

The 3M™ Versaflo(TM) S-Series High Durability Hood S-333G with integrated head suspension is cut to the same design as the S-133, but manufactured using a more durable, soft, quiet, low-linting fabric. It offers high levels of comfort including a ready to use integrated suspension.

3M™ Versaflo™ S-Series Hoods and Headcovers feature adjustable suspensions (most models) and soft comfort pads help provide excellent fit, stability and tracking. Suspension hoods and headcovers include wide faceseals with soft elastic for improved comfort and reduced air flow noise. Reusable suspension allows wearers to modify airflow distribution inside the hood to suit personal comfort needs.

The 3M™ Versaflo™ Pre Filter TR-3600 for use with the 3M™ Versaflo™ Powered Air Respirator TR-300. A Pre Filter can extend the life of the Powered Air Respirator by capturing large particles that would otherwise clog the filter.

The 3M™ Versaflo™ Powered Air Turbo Starter Kit TR-619E includes the TR-602E Turbo, A2P filter, filter cover, prefilters (x10), spark arrestor (x2), easy clean belt, high capacity battery, single station battery charger kit, BT-30 length adjusting breathing tube and airflow indicator.

The 3M™ Versaflo™ Powered Air Turbo Starter Kit TR-619E includes the TR-602E Turbo, A2P filter, filter cover, prefilters (x10), spark arrestor (x2), easy clean belt, high capacity battery, single station battery charger kit, BT-30 length adjusting breathing tube and airflow indicator.

Protect your 3M™ Versaflo™ M-Series Headtop visor from scratches or overspray from paints and chemicals with 3M™ Versaflo™ Peel-Off Visor Cover M-928. Our transparent visor cover is self-adhesive and can be applied and peeled off easily. You can apply up to five covers at one time, one on top of the other.

Provide protection against dust, mist and fumes and nuisance organic vapours with 3M™ Versaflo™ Particulate & Nuisance Organic Vapour Filter, TR-3802E. Our filter is designed to be used with 3M™ Versaflo™ Powered Air Turbo TR-300+ and is CE approved.

3M™ Versaflo™ BT-63 Length Adjusting Breathing Tube is designed to be used with 3M™ Full Facepiece Respirators FF-400 Series, 6000 Series, and 7800S Series and the 3M™ Versaflo™ Powered Air Purifying Respirator TR-600. When used in an approved configuration, the tight fitting PAPR assembly can provide an assigned protection factor (APF) of 1000 against certain gases, vapors, and particulates.

Size: Medium/Large. The 3M™ Versaflo™ S-533L Hood is approved for use with certain 3M™ Powered Air Purifying and Supplied Air Respirator Systems.

The TR-6700FC is a filter cover for use with the TR-6710N filter. 3M recommends the use of the filter cover in order to help physically protect the TR-6710N from damage. It is also used to hold the TR-6600 Prefilter or TR-662 Spark Arrestor in place.